How to fix internet access on Windows hosted network

Problem

Hosted network is a feature of Windows 8 using which you can turn a computer with a network connection into a wireless hotspot. For example, this can be used to convert a notebook with wired internet connection into a wireless hotspot for other wireless devices like smartphones, tablets or other notebooks. The steps to create such a wireless hotspot are described here.

Sometimes, you may find that your other devices can connect to the hosted network, but cannot get internet access.

Solution

This can be fixed by checking for two services:

  1. Open services.msc.

  2. Right-click on Internet Connection Sharing service. Change its Startup Style to Automatic. Start the service.

  3. Right-click on Routing and Remote Access service. Change its Startup Style to Automatic. Start the service.

You should have internet access on the devices connected to your wireless hotspot now.

Tried with: Windows 8.1 x64

Advertisements

20 thoughts on “How to fix internet access on Windows hosted network”

    1. Same issue. Could connect to the hosted network but unable to browse from the device. Hosted Network Status shows internet access is available.

      Like

    2. i got the solution … check it
      Step 1:
      Make sure all the dependency services of “Remote Access Connection Manager”” are started in services list..
      a. Click Start, type services.msc in the Start Search box.
      b. Select Services in the Programs list. If you are prompted for an administrator password or confirmation, type your password or click Continue
      c. Right-click Remote Access Connection Manager service and then click Properties.
      d. On the General tab, click Manual next to Startup type.
      e. On the General tab, click Start under Service status, and then click OK.
      f. Also check for the Dependency services.
      The following are the dependency services of “Remote Access Connection Manager”:
      i. Secure Socket Tunneling Protocol Service
      ii. Telephony
      iii. Plug and Play
      iv. Remote Procedure Call (RPC)
      v. DCOM Server Process Launcher
      vi. RPC Endpoint Mapper
      Make sure the above services are started in the services list. If not, start all of the above services and check.

      Like

  1. i have a solution for you
    first you open cmd then write netsh wlan stop hostednetwork and press enter
    second you write netsh wlan set hostednetwork mode=allow ssid=12345678 key=12345678 and press enter
    third you write netsh wlan start hostednetwork and press enter
    last it is that you write netsh wlan set hostednetwork mode=allow press enter
    after this the network you are using in network and sharing click change adapter setting
    go to your network that you are using first
    right click and chose properties
    go to sharing and mark tick at both in the box click the local area network________
    press ok
    in any windows this is 1000000000% work able

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s